digi.xbee.packets.relay module¶

class digi.xbee.packets.relay.UserDataRelayPacket(frame_id, local_interface, data=None)[source]¶

Bases: digi.xbee.packets.base.XBeeAPIPacket

This class represents a User Data Relay packet. Packet is built using the parameters of the constructor.

The User Data Relay packet allows for data to come in on an interface with a designation of the target interface for the data to be output on.

The destination interface must be one of the interfaces found in the corresponding enumerator (see XBeeLocalInterface).

See also

UserDataRelayOutputPacket
XBeeAPIPacket
XBeeLocalInterface

Class constructor. Instantiates a new UserDataRelayPacket object with the provided parameters.

Parameters:	frame_id (integer) – the frame ID of the packet. local_interface (`XBeeLocalInterface`) – the destination interface. data (Bytearray, optional) – Data to send to the destination interface.

See also

XBeeAPIPacket

XBeeLocalInterface

Raises:	ValueError – if `local_interface` is `None`. ValueError – if `frame_id` is less than 0 or greater than 255.

static create_packet(raw, operating_mode)[source]¶

Override method.

Returns:

UserDataRelayPacket.

Raises:

InvalidPacketException – if the bytearray length is less than 7. (start delim. + length (2 bytes) + frame type + frame id + relay interface + checksum = 7 bytes).
InvalidPacketException – if the length field of ‘raw’ is different than its real length. (length field: bytes 2 and 3)
InvalidPacketException – if the first byte of ‘raw’ is not the header byte. See SpecialByte.
InvalidPacketException – if the calculated checksum is different than the checksum field value (last byte).
InvalidPacketException – if the frame type is not ApiFrameType.USER_DATA_RELAY_REQUEST.
InvalidOperatingModeException – if operating_mode is not supported.

See also

XBeePacket.create_packet()

XBeeAPIPacket._check_api_packet()

needs_id()[source]¶: Override method.

See also

XBeeAPIPacket.needs_id()

dest_interface¶: XBeeLocalInterface. Destination local interface.

data¶: Bytearray. Data to send.

frame_id¶

Returns the frame ID of the packet.

Returns:	the frame ID of the packet.
Return type:	Integer

get_checksum()¶

Returns the checksum value of this XBeePacket.

The checksum is the last 8 bits of the sum of the bytes between the length field and the checksum field.

Returns:	checksum value of this XBeePacket.
Return type:	Integer

See also

factory

get_frame_spec_data()¶: Override method.

See also

XBeePacket.get_frame_spec_data()

get_frame_type()¶

Returns the frame type of this packet.

Returns:	the frame type of this packet.
Return type:	`ApiFrameType`

See also

ApiFrameType

get_frame_type_value()¶

Returns the frame type integer value of this packet.

Returns:	the frame type integer value of this packet.
Return type:	Integer

See also

ApiFrameType

is_broadcast()¶

Returns whether this packet is broadcast or not.

Returns:	`True` if this packet is broadcast, `False` otherwise.
Return type:	Boolean

output(escaped=False)¶

Returns the raw bytearray of this XBeePacket, ready to be send by the serial port.

Parameters:	escaped (Boolean) – indicates if the raw bytearray will be escaped or not.
Returns:	raw bytearray of the XBeePacket.
Return type:	Bytearray

to_dict()¶

Returns a dictionary with all information of the XBeePacket fields.

Returns:	dictionary with all information of the XBeePacket fields.
Return type:	Dictionary

static unescape_data(data)¶

Un-escapes the provided bytearray data.

Parameters:	data (Bytearray) – the bytearray to unescape.
Returns:	`data` unescaped.
Return type:	Bytearray

class digi.xbee.packets.relay.UserDataRelayOutputPacket(local_interface, data=None)[source]¶

Bases: digi.xbee.packets.base.XBeeAPIPacket

This class represents a User Data Relay Output packet. Packet is built using the parameters of the constructor.

The User Data Relay Output packet can be received from any relay interface.

The source interface must be one of the interfaces found in the corresponding enumerator (see XBeeLocalInterface).

See also

UserDataRelayPacket
XBeeAPIPacket
XBeeLocalInterface

Class constructor. Instantiates a new UserDataRelayOutputPacket object with the provided parameters.

Parameters:	local_interface (`XBeeLocalInterface`) – the source interface. data (Bytearray, optional) – Data received from the source interface.
Raises:	ValueError – if `local_interface` is `None`.

See also

XBeeAPIPacket

XBeeLocalInterface

static create_packet(raw, operating_mode)[source]¶

Override method.

Returns:

UserDataRelayOutputPacket.

Raises:

InvalidPacketException – if the bytearray length is less than 6. (start delim. + length (2 bytes) + frame type + relay interface + checksum = 6 bytes).
InvalidPacketException – if the length field of ‘raw’ is different than its real length. (length field: bytes 2 and 3)
InvalidPacketException – if the first byte of ‘raw’ is not the header byte. See SpecialByte.
InvalidPacketException – if the calculated checksum is different than the checksum field value (last byte).
InvalidPacketException – if the frame type is not ApiFrameType.USER_DATA_RELAY_OUTPUT.
InvalidOperatingModeException – if operating_mode is not supported.

See also

XBeePacket.create_packet()

XBeeAPIPacket._check_api_packet()

needs_id()[source]¶: Override method.

See also

XBeeAPIPacket.needs_id()

frame_id¶

Returns the frame ID of the packet.

Returns:	the frame ID of the packet.
Return type:	Integer

get_checksum()¶

Returns the checksum value of this XBeePacket.

The checksum is the last 8 bits of the sum of the bytes between the length field and the checksum field.

Returns:	checksum value of this XBeePacket.
Return type:	Integer

See also

factory

get_frame_spec_data()¶: Override method.

See also

XBeePacket.get_frame_spec_data()

get_frame_type()¶

Returns the frame type of this packet.

Returns:	the frame type of this packet.
Return type:	`ApiFrameType`

See also

ApiFrameType

get_frame_type_value()¶

Returns the frame type integer value of this packet.

Returns:	the frame type integer value of this packet.
Return type:	Integer

See also

ApiFrameType

is_broadcast()¶

Returns whether this packet is broadcast or not.

Returns:	`True` if this packet is broadcast, `False` otherwise.
Return type:	Boolean

output(escaped=False)¶

Returns the raw bytearray of this XBeePacket, ready to be send by the serial port.

Parameters:	escaped (Boolean) – indicates if the raw bytearray will be escaped or not.
Returns:	raw bytearray of the XBeePacket.
Return type:	Bytearray

to_dict()¶

Returns a dictionary with all information of the XBeePacket fields.

Returns:	dictionary with all information of the XBeePacket fields.
Return type:	Dictionary

static unescape_data(data)¶

Un-escapes the provided bytearray data.

Parameters:	data (Bytearray) – the bytearray to unescape.
Returns:	`data` unescaped.
Return type:	Bytearray

src_interface¶: XBeeLocalInterface. Source local interface.

data¶: Bytearray. Received data.