digi.xbee.comm_interface module

class digi.xbee.comm_interface.XBeeCommunicationInterface

Bases: object

This class represents the way the communication with the local XBee is established.

open()

Establishes the underlying hardware communication interface.

Subclasses may throw specific exceptions to signal implementation specific errors.

close()

Terminates the underlying hardware communication interface.

Subclasses may throw specific exceptions to signal implementation specific hardware errors.

is_interface_open

Returns whether the underlying hardware communication interface is active or not.

Returns:True if the interface is active, False otherwise. Return type:Boolean

wait_for_frame(operating_mode)

Reads the next API frame packet.

This method blocks until:

• A complete frame is read, in which case returns it.
• The configured timeout goes by, in which case returns None.
• Another thread calls quit_reading, in which case returns None.

This method is not thread-safe, so no more than one thread should invoke it at the same time.

Subclasses may throw specific exceptions to signal implementation specific hardware errors.

Parameters:operating_mode (OperatingMode) – The operating mode of the XBee connected to this hardware interface. Note: If this parameter does not match the connected XBee configuration, the behavior is undefined. Returns:

The read packet as bytearray if a packet is read,

None otherwise.

Return type:Bytearray

quit_reading()

Makes the thread (if any) blocking on wait_for_frame return.

If a thread was blocked on wait_for_frame, this method blocks (for a maximum of ‘timeout’ seconds) until the blocked thread is resumed.

write_frame(frame)

Writes an XBee frame to the underlying hardware interface.

Subclasses may throw specific exceptions to signal implementation specific hardware errors.

Parameters:frame (Bytearray) – The XBee API frame packet to write. If the bytearray does not correctly represent an XBee frame, the behaviour is undefined.

get_network(local_xbee)

Returns the XBeeNetwork object associated to the XBeeDevice associated to this XBeeCommunicationInterface.

Some XBeeCommunicationInterface implementations may need to handle the `XBeeNetwork associated to the XBeeDevice themselves. If that is the case, a implementation-specific XBeeNetwork object that complains to the generic XBeeNetwork class will be returned. Otherwise, this method returns None and the associated XBeeNetwork is handled as for a serial-connected XBeeDevice.

Parameters:local_xbee (XBeeDevice) – The local XBee device. Returns:

class: .XBeeNetwork: None if the XBeeNetwork should handled as

usual, otherwise a XBeeNetwork object.

get_local_xbee_info()

Returns a tuple with the local XBee information.

This is used when opening the local XBee. If this information is provided, it is used as internal XBee data, if not provided, the data is requested to the XBee.

Returns:

Tuple with local XBee information: operation mode (int),

hardware version (int), firmware version (int), 64-bit address (string), 16-bit address (string), node identifier (string), and role (int).

Return type:Tuple

supports_update_firmware()

Returns if the interface supports the firmware update feature.

Returns:True if it is supported, False otherwise. Return type:Boolean

update_firmware(xbee, xml_fw_file, xbee_fw_file=None, bootloader_fw_file=None, timeout=None, progress_callback=None)

Performs a firmware update operation of the provided XBee.

Parameters:

• xbee (AbstractXBeeDevice) – Local or remote XBee node to be updated.
• xml_fw_file (String) – Path of the XML file that describes the firmware to upload.
• xbee_fw_file (String, optional) – Location of the XBee binary firmware file.
• bootloader_fw_file (String, optional) – Location of the bootloader binary firmware file.
• timeout (Integer, optional) – Maximum time to wait for target read operations during the update process.
• progress_callback (Function, optional) –

  Function to execute to receive progress information. Receives two arguments:

  • The current update task as a String
  • The current update task percentage as an Integer

Raises:

• XBeeException – If the local XBee is not open.
• InvalidOperatingModeException – If the local XBee operating mode is invalid.
• OperationNotSupportedException – If the firmware update is not supported in the XBee.
• FirmwareUpdateException – If there is any error performing the firmware update.

supports_apply_profile()

Returns if the interface supports the apply profile feature.

Returns:True if it is supported, False otherwise. Return type:Boolean

apply_profile(xbee, profile_path, timeout=None, progress_callback=None)

Applies the given XBee profile to the XBee device.

Parameters:

• xbee (AbstractXBeeDevice) – Local or remote XBee node to be updated.
• profile_path (String) – Path of the XBee profile file to apply.
• timeout (Integer, optional) – Maximum time to wait for target read operations during the apply profile.
• progress_callback (Function, optional) –

  Function to execute to receive progress information. Receives two arguments:

  • The current apply profile task as a String
  • The current apply profile task percentage as an Integer

Raises:

• XBeeException – If the local XBee is not open.
• InvalidOperatingModeException – If the local XBee operating mode is invalid.
• UpdateProfileException – If there is any error applying the XBee profile.
• OperationNotSupportedException – If XBee profiles are not supported in the XBee.

timeout

Returns the read timeout.

Returns:Read timeout in seconds. Return type:Integer